自然风对旋转弹丸外弹道性能影响的仿真研究

为研究自然风对旋转弹丸外弹道性能的影响,基于坐标变换理论考虑了地球曲率变化对刚体弹道模型的作用,分析了自然风对各气动力和气动力矩的影响,建立了非标准条件下的刚体外弹道模型。应用该模型对某105mm榴弹不同风速、风向下的外弹道过程进行仿真,结果表明,自然风对飞行弹丸的攻角姿态有较大影响,进而影响弹丸的射程和方向偏移量;自然风对弹丸攻角姿态的影响在弹丸飞行的初始阶段风速大小起主要作用,而在弹丸飞行的中间阶段则是风矢方向起主要作用。     

多轴向织物层合板层间剪切强度有限元分析与实验研究

用VIMP工艺制备了UD、0/45/-45、0/45/90/-45三种多轴向织物增强,四种厚度的GFRP层合板试样,采用短梁剪切实验考察了层间剪切强度和破坏模式。建立了GFRP层合板短梁剪切试样有限元模型,计算了内部层间剪应力分布。结合计算和实验结果分析表明层合板存在由宽度方向层间剪应力变化导致的自由边缘效应,含偏轴铺层的层合板更容易发生边缘开裂破坏。厚度相同时0/45/-45多轴向织物增强层合板的层间剪切强度最高。短梁剪切强度测试存在尺寸效应,随着厚度的增加,强度下降,样品波动系数增大。     

风场的科学计算可视化在导弹射击中的应用

在导弹射击时,消除风会对导弹飞行造成不利的影响,因此基于可视化分析的研究模型、流程等,利用科学计算方法直观分析优点对风的大小和方向进行分析,并采用开放图形接口对实验风场数据进行了三维图形绘制以提高导弹打击目标的精度,对实际中导弹的风场阻力研究有一定的指导意义.     

南水北调中线工程安阳段渠坡换填土的强度特性研究

为了分析南水北调中线工程安阳段渠坡的稳定性,对该渠坡换填土在不同含水率下进行了不固结不排水三轴剪切试验.研究结果表明:剪切速率对基质吸力的影响较大,而对强度的影响较小;通过比较确定了合适的剪切速率;含水率相同的试样在不同围压下的强度值在pf -qf坐标上呈良好的线性关系;得到了试样在不同含水率下的总强度指标,建立了总内...     

弹性基上圆柱管弯曲行为的高阶剪切梁理论解

以弹性基上圆柱管为研究对象,基于高阶剪切变形梁理论推导了Winkler弹性基圆柱管弯曲变形的高阶剪切梁理论控制方程,给出四种典型工况弯曲问题的精确解.研究表明,无须假设剪切修正系数,只需引入适当横截面翘曲形状函数,高阶梁理论在圆柱管内外表面满足剪应力τxr为零的边界条件,且对于不同长径比和厚径比的圆柱管弯曲问题均能提供...     

A higher order coupled frequency characteristics study of smartmagneto-electro-elastic composite plates with cut-outs using finite element methods

This article deals with investigating the effect of cut-outs on the natural frequencies of magneto-electro-elastic (MEE) plates incorporating finite element methods based on higher order shear deformation theory (HSDT). In order to consider the influence of cut-out, the energy of the cut-out domain is sub-tracted from the total energy of the entire plate. The governing equations of motions are derived through incorporating Hamilton's principle and the solution is obtained using condensation technique. The proposed numerical formulation is verified with the results of previously published literature as well as the numerical software. In addition, this research focuses on evaluating the effect of geometrical skewness and boundary conditions on the frequency response. The influence of cut-outs on the degree of coupling between magnetic, electric and elasticfields is also investigated.     

Numerical simulation study on penetration performance of depleted Uranium (DU) alloy fragments

Due to its high strength, high density, high hardness and good penetration capabilities, Depleted ura-nium alloys have already shined in armor-piercing projectiles. There should also be a lot of room for improvement in the application of fragment killing elements. Therefore, regarding the performance of the depleted uranium alloy to penetrate the target plate, further investigation is needed to analyze its advantages and disadvantages compared to tungsten alloy. To study the difference in penetration per-formance between depleted uranium alloy and tungsten alloy fragments,firstly, a theoretical analysis of the adiabatic shear sensitivity of DU and tungsten alloys was given from the perspective of material constitutive model. Then, taking the cylindrical fragment penetration target as the research object, the penetration process and velocity characteristics of the steel target plates penetrated by DU alloy frag-ment and tungsten alloy fragment were compared and analyzed, by using finite element software ANSYS/LS-DYNA and Lagrange algorithm. Lastly, the influence of different postures when impacting target and different fragment shapes on the penetration results is carried out in the research. The results show that in the penetration process of the DU and tungsten alloy fragments, the self-sharpening properties of the DU alloy can make the fragment head sharper and the penetrating ability enhance. Under the same conditions, the penetration capability of cylindrical fragment impacting target in vertical posture is better than that in horizontal posture, and the penetration capability of the spherical fragment is slightly better than that of cylindrical fragment.     

An interface shear damage model of chromium coating/steel substrate under thermal erosion load

The Cr-plated coating inside a gun barrel can effectively improve the barrel's erosion resistance and thus increase the service life.However,due to the cyclic thermal load caused by high-temperature gun-powder,micro-element damage tends to occur within the Cr coating/steel substrate interface,leading to a gradual deterioration in macro-mechanical properties for the material in the related region.In order to mimic this cyclic thermal load and,thereby,study the thermal erosion behavior of the Cr coating on the barrel's inner wall,a laser emitter is utilized in the current study.With the help of in-situ tensile test and finite element simulation results,a shear stress distribution law of the Cr coating/steel substrate and a change law of the interface ultimate shear strength are identified.Studies have shown that the Cr coating/steel substrate interface's ultimate shear strength has a significant weakening effect due to increasing temperature.In this study,the interfacial ultimate shear strength decreases from 2.57 GPa(no erosion)to 1.02 GPa(laser power is 160 W).The data from this experiment is employed to establish a Cr coating/steel substrate interface shear damage model.And this model is used to predict the flaking process of Cr coating by finite element method.The simulation results show that the increase of coating crack spacing and coating thickness will increase the service life of gun barrel.     

预报风强度对火箭最大气动载荷精度影响及建模分析

针对不同预报风强度的精度以及其对应的最大气动载荷预报值精度的研究文献极少。以某地区实况风为基准,分别对不同预报风强度的精度以及其对应的最大气动载荷预报值精度特征进行了分析,并利用多元线性回归方法建立了订正模型,结果表明在预报日数第1～11天,预报风强度越大,预报风精度及其对应的最大气动载荷预报值精度越高;利用多元线性回归方法可提高最大气动载荷预报值精度,且预报风强度越小,最大气动载荷预报精度提高越明显。这些发现在火箭发射前的飞行保障及安全决策方面具有参考价值。     

爆炸复合接头剪切强度测试方法研究

参照正交各向异性层压复合板层间剪切强度的测试方法,提出了用于测试爆炸复合接头复合界面剪切强度的3种方法;并建立三维有限元模型,分别对3种测试方法进行模拟;最后分别对3种方法进行了测试试验.结果表明,3种试验方法均能有效测试爆炸复合接头的剪切强度,其中对称试件双切口拉伸法最适合实际应用.